1. Overview
The "Emergency Stop" alarm occurs when an Emergency Stop button is pressed.
The following alarms may appear on the system:
- "RCP, Emergency Stop"
- "MCP, Emergency Stop"
- "PSE, PSE Emergency Stop & Abnormal"
📌 To reset these alarms, follow the steps below.
2. Resetting the "RCP, Emergency Stop" Alarm
- Locate the RCP (Remote Control Panel), typically installed in the C.C.R (Cargo Control Room).
- Turn the Emergency Stop button clockwise to reset it.
- On the touchscreen, press and hold the "RESET" button (bottom right corner) for 2 seconds.
- Confirm that the alarm turns green, indicating successful reset.
3. Resetting the "MCP, Emergency Stop" & "PSE, Emergency Stop & Abnormal" Alarms
- Locate the MCP (Main Control Panel) and PSE (Power Supply Equipment), usually installed in the E.R (Engine Room).
- Turn the Emergency Stop button clockwise to reset it.
- On the touchscreen, press and hold the "RESET" button (bottom right corner) for 2 seconds.
- Confirm that the alarm turns green, indicating successful reset.
4. Summary of Key Actions
| Alarm Type | Location | Reset Procedure |
|---|---|---|
| RCP, Emergency Stop | C.C.R (Cargo Control Room) | Turn the Emergency Stop button clockwise → Press "RESET" for 2 seconds |
| MCP, Emergency Stop | E.R (Engine Room) | Turn the Emergency Stop button clockwise → Press "RESET" for 2 seconds |
| PSE, Emergency Stop & Abnormal | E.R (Engine Room) | Turn the Emergency Stop button clockwise → Press "RESET" for 2 seconds |
Comments
0 comments
Article is closed for comments.