1. Introduction

This manual provides step-by-step instructions for replacing and assembling the SOL DIN connector. Proper installation ensures reliable grounding and secure connections.

2. Tools Required

• Flat-head screwdriver ("-")
• Replacement SOL DIN connector
• Locking nut

3. Disassembly Procedure

1. Remove the Bolt:

   • Use a flat-head screwdriver to loosen and remove the bolt securing the connector.
   • 

2. Detach the SOL DIN Connector:

   • Carefully remove the SOL DIN connector and inspect the product to be replaced.
   • 
   • Check for grounding alignment and note the current orientation.
   • 

3. Remove the Locking Nut:

   • Use the flat-head screwdriver to disassemble the locking nut.

4. Separate the Connector:

   • Disassemble the connector body using the screwdriver, ensuring no internal damage occurs.
   • 

4. Reassembly Procedure

1. Check the Grounding Direction:

   • Compare the grounding direction of the new connector with the removed one.
   • If necessary, rotate the grounding 180° before reassembly.
   • 

2. Reassemble the Connector:

   • Insert the connector back into position in the reverse order of disassembly.

3. Secure the Locking Nut:

   • Tighten the locking nut to ensure a stable connection.

4. Reinstall the Bolt:

   • Secure the connector by reinstalling and tightening the bolt.

5. Verification & Testing

• Confirm grounding orientation before applying power.
• Inspect for loose connections or unsecured parts.
• Check system functionality after reassembly to ensure a stable connection.

6. Troubleshooting Guide

7. Additional Notes

• Always confirm proper grounding alignment before installation.
• Do not overtighten screws to prevent damage to connector threads.
• Ensure the lock nut is fully secured to avoid loose connections over time.